Commissioning

Remove the Top Cover

Unscrew the four screws and remove the top cover of the enclosure.

Insert the SIM Card

Place the SIM card into the SIM holder. Ensure that the PIN code request is disabled on the SIM card. The unit must be powered off during installation.

Reattach the Top Cover

Install the top cover back onto the enclosure and tighten the four screws.

Connect the Unit to the Corrector

Connect the telemetry unit to the corrector according to the wiring diagram provided in the product manual.

Apply Power to the Unit

Plug the power supply into a 220 V AC mains outlet to energize the unit.

Install GSM Antenna

The antenna connects to the connector located on the top of the device. Tighten the connector nut firmly, but do not apply excessive force to avoid damaging the threads. Installation Recomendations.

Verify Power-On Indicator

After power is applied, a red LED on the unit housing should blink with an interval of 0.8 seconds.

Wait for GSM Network Registration

Once the unit registers on the GSM network, the red LED will change its blinking pattern to a 3-second interval, and the unit will automatically transmit data to the server.